1. The water separator can control the heating temperature of each room or area in different ways. The user can adjust the temperature of the room according to his own needs; the manual exhaust valve of the water separator can allow the user to exhaust the gas in the pipeline to ensure that each Heating temperature of the pipeline.

2. There is a filter on the front of the water separator. The user removes the filter at the lower end of the filter regularly or irregularly during the annual heating period, and then installs it to ensure the cleanliness of the water pipe. After the heating is over, clean the pipe network with clean water.

3. At the beginning of heating, the temperature will not be felt immediately. During this period, the indoor concrete floor is gradually heating and storing thermal energy. After 2-4 days, the design temperature can be reached. If the user's own heating water temperature should not exceed 65 ℃.

4. If you are not at home for a long time, you can use the main valve of the water separator to reduce the amount of circulating water, and you must not close it all. If the room is not heated throughout the winter, the water in the pipe should be blown out.